# Regular Expressions¶

## Introduction to Regular Expressions¶

Much of the content in this book requires that you have some mastery of regular expressions. Indeed, in my years of teaching mod_rewrite, it has been my observation that people don’t find mod_rewrite hard at all: they’re just intimidated by regular expressions.

There is one excellent book about regular expressions, and if you want to become a regular expression (or “regex”) guru, you should get it. That book is Mastering Regular Expressions <http://regex.info/book.html> by Jeffrey Friedl.

If you just want to know enough about regex to master mod_rewrite, read this chapter a few times, and that should be sufficient.

The goal of this chapter is to introduce the building blocks - the basic vocabulary - and then discuss some of the arcana of crafting your own regular expressions, as well as reading those that others have bequeathed to you. If you are already reasonably familiar with regex syntax, you can safely skip this chapter.

### The Building Blocks¶

Regular expressions are a means to describe a text pattern (technically, it’s any data, but in the context of Apache httpd, we’re primarily interested in text as it appears in URLs), so that you can look for that pattern in a block of data. The best way to read any regular expression is one character at a time, so you need to know what each character represents.

These are the basic building blocks that you will use when writing regular expressions. If you don’t already know regex syntax, you’ll want to stick a bookmark on this page, since you’ll be referring to it until you become familiar with these characters. The Regular expression vocabulary table is your key to translating a line of seemingly random characters into a meaningful pattern. The table will be followed by further explanations and examples for each of the items in the table.

 Character Meaning . Any character \ Escapes a character that has a special meaning. Thus, \. means a literal . character. You can match a literal \ character by using \\. Additionally, placing \ in front of a regular character can add a special meaning to that character. For example, \t means a tab character. ^ An anchor which insists that the pattern start at the beginning of the string. ^A means that the string must start with A. $An anchor which insists that the string ends with the specified pattern. X$ means that the string must end with X. + Match the previous thing one or more times. So a+ means one or more a’s. * Match the previous thing zero or more times. This is the same as +, except that it’s also acceptable if the thing wasn’t there at all. ? Match the previous thing zero or one times. In other words, it makes it optional. It also makes the * and + characters non-greedy. [1] {n,m} Indicates that the previous thing should match at least n, and not more than m times. For example, a{2,7} matches at least 2, and not more than 7, occurrences of the letter a ( ) Provides grouping and capturing functions. Grouping means treating more than one character as though they were a single unit. You can apply repetition characters to a group created in this way. Capturing means remembering the thing that matched, so that we can use it again later. This is called a ‘backreference.’ [ ] Called a “character class,” this matches only one of the contained characters. For example, [abc] matches a single character which is either a or b or c. ^ Negates a match within a character set. (Remember that outside of a character class, it means something else. See above.) Thus, [^abc] matches a single character which is neither a nor b nor c. ! Placed on the front of a regular expression, this means “NOT”. That is, it negates the match, and so succeeds only if the string does not match the pattern.

That’s not all there is to regular expressions, but it’s a really good starting point. Each regular expression presented in this book will have an explanation of what it’s doing, which will help you see in practical examples what each of the above characters actually ends up meaning in the wild. And, in my experience, regular expressions are understood much more quickly via examples rather than via lectures.

What follows is a more detailed explanation of each of the items in the table above, with examples.

### Matching anything¶

The . character in a regular expression matches any character. For example, consider the following pattern:

a.c


That pattern matches a string containing a, followed by any character, followed by c. So, that pattern matches the strings “abc”, “ancient”, and “warcraft”, each of which contain that pattern. It does not match “tragic”, on the other hand, because there are two characters between the a and the c. That is, the . by itself, matches a single character only.

The . character is very frequently used in connection with * to mean “match everything”. You’ll see the (.*) pattern appearing often throughout this book, and throughout examples that you see online. And while it’s often what you want, it’s just as often used incorrectly. Remember that while (.*) matches any string, so will the simpler and faster pattern ^ because every string has a start (even an empty string) and so ^ matches it.

It’s faster, too, because while (.*) has to match all the way out to the end of the string, ^ only has to note that the string has a beginning, and then it is done. Note also that the pattern (.*) has parenthesis and therefore captures the matched string into the variable $1. If you’re not planning to use$1 in a later substitution, then this, in addition to being a waste of computation cycles, is a waste of memory.

While considerations of this kind probably won’t save you a noticeable amount of time, getting into the habit of writing efficient regular expressions will, in the long run, not only save you these small amounts, but will result in rules that are easier to understand and easier to maintain, because they match only what you’re interested in, and nothing more.

### Escaping characters¶

. index:: Escape characters . index:: Metacharacters

The backslash, or escape character, either adds special meaning to a character, or removes it, depending on the context. For example, you’ve already been told that the . character has special meaning. But if you want to match the literal . character, then you need to escape it with the backslash. So, while . means “any character,” \. means a literal ”.” character.

Conversely, some characters gain special meaning when prefixed by a \ character. For example, while s means a literal “s” character, \s means a “whitespace” character. That is, a space or a tab.

The Metacharacter table lists useful escape characters that you’ll see throughout the book and can be used as shorthand for more verbose patterns.

 Character Meaning \d Match any character in the range 0 - 9 \D Match any character NOT in the range 0 - 9 \s Match any whitespace characters (space, tab etc.). \S Match any character NOT whitespace (space, tab). \w Match any character in the range 0 - 9, A - Z and a - z \W Match any character NOT the range 0 - 9, A - Z and a - z \b Word boundary. Match any character(s) at the beginning (\babc) and/or end (abc\b) of a word, thus \bcow\b will match cow but not cows, but \bcow will match cows. \B Not a word boundary. Match any character(s) NOT at the beginning(\Babc) and/or end (cow\B) of a word, thus \Bcow\B will match scows but not cows, but cow\B will match coward. \t Match a tab character \n Match a newline character \x Matches a character with a particular hex code. For example, \x5A would match a Z, which has a hex code of 5A.

The term “metacharacter” is often also applied to characters such as . and $which have special meanings within regular expressions. ### Anchoring text¶ Referred to as anchor characters, these ensure that a string starts with, or ends with, a particular character, or sequence of characters. Since this is a very common need, these are included in this basic vocabulary. Consider the examples in the anchor examples table  Example Meaning ^/ This matches any string that starts with a slash .jpg$ This pattern matches any string that ends with .jpg. /$Matches a string that starts with, and ends with, a slash. That is, it will only match a string that is a single slash, and nothing else. ^$ Matched an empty string - that is, a string that has nothing between its start and its end.

Remember, as you craft your regular expressions, that they are, by default, a substring match. Which is to say, a pattern of cow matches cow, scow, coward, and pericowperitis, because they all contain “cow” somewhere in them. Using the anchor characters allow you to be more specific as to what you wanted to match. The \b metacharacter, introduced above, can also be useful in some contexts, but perhaps less so when you’re dealing with URLs.

### Matching one or more characters¶

The + character allows a pattern or character to match more than once. For example, the following pattern will allow for common misspellings of the word “giraffe”.

giraf+e+

This pattern will allow one or more f’s, as well as one or more e’s. So it matches “girafe”, “giraffe”, and “giraffee”. It will also match “girafffffeeeeee”.

Be sure to use + rather than * when you want to ensure non-empty matches.

### Matching zero or more characters¶

The * character allows the previous character to match zero or more times. That is to say, it’s exactly the same as +, except that it also allows for the pattern to not match at all. This is often used when + was meant, which can result in some confusion when it matches an empty string. As an example, we’ll use a slight modification of the pattern used in the above section:

giraf*e*

This pattern matches the same strings listed above (“giraffe”, “girafe” and “giraffee”) but will also match the string “giraeeeee”, which contains zero “f” characters, as well as the string “gira”, which contains zero “f” characters and zero “e” characters.

Most commonly, you’ll see it used in conjunction with the . character, meaning “match anything.” Frequently, in that case, the person using it has forgotten that regular expressions are substring matches. For example, consider this pattern:

.*\.gif$ The intent of that pattern is to match any string ending in .gif. The$ insists that it is at the end of the string, and the \ before the . makes that a literal . character, rather than the wildcard . character. In this particular case, the .* was there to mean “starts with anything,” but is completely unnecessary, and will only serve to consume time in the matching process.

A more useful example of the * character is one which checks for a comment line in an Apache configuration file. The first non-space character needs to be a #, but the spaces are optional:

^\s*#

This pattern, then, matches a string that might (but doesn’t have to) begin with whitespace, followed by a #. This ensures that the first non-space character of the line is a #.

### Repetition quantifiers¶

If you want to match a particular number of times, you can use the {n,m} quantifier to specify the range of times you wish to match. The possibilities of how you can specify this are shown in table repetition quantifiers table

 Pattern Meaning {n} Match exactly n times {n,} Match at least n times {n,m} Match at least n times, but not more than m times

### Greedy Matching¶

In the case of all of the repetition characters above, matching is greedy. That is, the regular expression matches as much as it possibly can. That is, if you apply the regular expression a+ to the string aaaa, matches the entire string, and not be satisfied by just the first a. This is particularly important when you are using the .* syntax, which can occasionally match more than you thought it would. I’ll give some examples of this after we’ve discussed a few more metacharacters.

On the other hand, if you wish for matches to not be greedy, you can offset the greedy nature of the repetition character by putting a ? after it.

Consider, for example, a scenario where I want to match everything between two slashes in a URL. I’ll be applying the regular expression to the URI /one/two/three/, and I’ll try a greedy, and not-greedy, regular expression. The table of greedy examples shows the results of these patterns.

 Pattern Matches /(.*)/ one/two/three /(.*?)/ one

The first regex is greedy, and matches as much as it possibly can, going out to the last slash. The second is non-greedy, and so stops as early as it can, when it encounters the second slash.

### Making a match optional¶

The ? character makes a single character match optional. This is extremely useful for common misspellings, or elements that may, or may not, appear in a string. For example, you might use it in a word when you’re not sure whether it’s supposed to be hyphenated:

e-?mail

The above pattern matches both “email” and “e-mail”, so that either spelling will be accepted. Likewise, you could use:

colou?r

to match the word color both as it is spelled in the USA, and the way that it is spelled in the rest of the world.

Additionally, the ? character turns off the “greedy” nature of the + and * characters. Thus, putting a ? after a + or a * will make it match as little as it possibly can. See the earlier comments about Greedy matching.

Further examples of the greedy vs. non-greed behavior will follow once we have learned about backreferences.

### Grouping and capturing¶

Parentheses allow you to group several characters as a unit, and also to capture the results of a match for later use. The ability to treat several characters as a unit is extremely useful in pattern matching. Think of it as combining several atoms into a single molecule. For example, consider this example:

(abc)+

This will look for the sequence “abc” appearing one or more times, and so would match the string “abc” and the string “abcabc”.

### Backreferences¶

Even more useful is the “capturing” functionality of the parentheses. Once a pattern has matched, you often want to know what matched, so that you can use it later. This is usually referred to as “backreferences.”

For example, you may be looking for a .gif file, as in the example above, and you really want to know what .gif file you matched. By capturing the filename with parentheses, you can use it later on:

(.*\.gif)$ In the event that this pattern matches, we will capture the matching value in a special variable,$1. (In some contexts, the variable may be called %1 instead.) If you have more than one set of parentheses, the second one will be captured to the variable $2, the third to$3, and so on. Only values up through $9 are available, however. The reason for this is that$10 would be ambiguous. It might mean $1, followed by a literal zero (0), or it might mean$10. Rather than providing additional syntax to disambiguate this term, the designer of mod_rewrite instead chose to only provide backreferences through $9. The exact way in which you can exploit this feature will be more obvious later, once we start looking at the RewriteRule directive in RewriteRule Consider these two patterns, applied to the string “canadian”. c(.*)n c(.*?)n The first pattern will return with a value of “anadia” in$1, since it will match as much as it possibly can between the first c and the last n it sees. The second, on the other hand, will return with $1 set to “a”, since it is non-greedy, and so stops at the first n it sees. It is instructive to acquire a tool such as Regex Coach, or Rebug, mentioned at the end of the chapter, and feed them these patterns and strings, to watch them match the different parts of the string. Mastering Regular Expressions also has a very complete treatment of backreferences, greedy matching, and what actually happens during the matching phase. ### Character Classes¶ A character class allows you to define a set of characters, and match any one of them. There are several built-in character classes, like the \s metacharacter that you saw above. Using the [ ] notation lets you define your own custom character classes. As a very simple example, consider the following: [abc]  This character class matches the letter a, or the letter b, or the letter c. For example, if we wanted to match the subset of users whose usernames started with one of those letters, we might look for the pattern: /home/([abc].*) This combines several of the characters that we’ve worked with. It ends up matching a directory path for that subset of users, and the username ends up in the$1 variable. Well, actually, not quite, as we’ll see in a minute, but almost.

The character class syntax also allows you to specify a range of characters fairly easily. For example, if you wanted to match a number between 1 and 5, you can use the character class [1-5].

Within a character class, the ^ character has special meaning, if it is the first character in the class. The character class [^abc] is the opposite of the character class [abc]. That is, it matches any character which is not a, b, or c.

Which brings us back to the example above, where we are attempting to match a username starting with a, b, or c. The problem with the example is that the * character is greedy, meaning that it attempts to match as much as it possibly can. If we want to force it to stop matching when it reaches a slash, we need to match only “not slash” characters:

/home/([abc][^/]+)

I’ve replaced the .* with [^/]+ which has the effect that, rather than matching any character, it matches only not-slash characters. In other words, it will only match up to a slash, or the end of the string, whichever comes first. Also, I’ve used + instead of *, since one-character usernames are typically not permitted. Now, $1 will contain the username, whereas, before, it could possibly have contained other directory path components after the username. ### Negation¶ Finally, if you wish to negate an entire regular expression match, prefix it with !. This is not consistent across all regular expression implementations, but can be used in a number of them. A very common use of this in the context of rewrite rules will be to indicate that you want a pattern to apply to all directories except for one. So, for example, if we wanted to exclude the /images directory from consideration, we would match the /images directory, but then negate the match, thus: !^/images This matches any path not starting with /images. We’ll see more of this kind of pattern match especially in the chapter Proxying with mod_rewrite. ## Regex examples¶ A few examples may be instructive in your understanding of how regular expressions work. We’ll start with a few of the cases that you may frequently encounter, and suggest a few alternate solutions to each. ### Email address¶ We’ll start with a common favorite. You want to craft a regular expression that matches an email address. The general format of an email address is “something @ something dot something”. When you are crafting a regular expression from scratch, it’s good to express the pattern to yourself in terms like this, because it’s a good start towards writing the expression itself. To express this as a regular expression, let’s take the component parts. The catch all “something” part can likely be expressed as .* and the . and @ parts are literal characters. So, this gives us a starting point of: .*@.*\..* This is a good start, and matches most email addresses. It will probably match all email addresses. However, it will also match a lot of stuff that isn’t email addresses, like “@@@.@”, “@.com”, and “This isn’t an em@il address.” So we have to try something a little more specific. We want to require that the “something” before the @ sign is not zero length, and contains certain types of characters. For example, it should be alpha-numeric, but may also contain certain other special characters, like dot, underscore, or dash. Fortunately, PCRE provides us with a convenient way to say “alpha-numeric characters,”, using a named character class. There are quite a number of these, such as [:alpha:] to match letters, [:digit:] to match numbers 0 through 9, and [:alnum:] to match alpha-numeric characters. Next, we want to ensure that the domain name part of the pattern is alphanumeric too, except that the top level domain (tld), i.e., the last part of the domain name, must be letters. And we want to allow an arbitrary number of dots in the hostname, so that “a.com” and “mail.s.ms.uky.edu” are both valid hostname portions of an email address. So we can say the above description as: ^[:alnum:]._-]@([:alnum:]+\.)+[:alpha:]+$

This is far more specific, and will match most valid email addresses. However, it will also exclude a few edge-cases, as well as allowing some things that are not valid addresses, such as invalid domain names.

You should note that this was something of a fool’s errand - there does not exist a regular expression that matches all possible email addresses. Indeed, I started with this example to give you a flavor for just how complicated it can be to craft a pattern for something that is not well defined.

For more discussion of writing regular expressions to match email addresses, simply search for email regex in your favorite search engine, and you’ll find many, many articles about how and why it is impossible.

### Phone number¶

Next we’ll consider the problem of matching a phone number. This is much harder than it would at first appear. We’ll assume, for the sake of simplicity, that we’re just trying to match US phone numbers, which are 10 numbers.

The number consists of three numbers, then three more, then four more. These numbers may, or may not, be separated by a variety of things. The first three may or may not be enclosed in parentheses. So we’ll try something like this:

$$?\d{3}$$?[-. ]?\d{3}[-. ]?\d{4}

This pattern matches most US phone numbers, in most of the ordinary formats. The first three numbers may or may not be in parentheses, and the blocks of numbers may or may not be separated by dashes (-), dots (.) or spaces.

It is still far from foolproof, because users will come up with ways to submit data in unexpected format.

Let’s go though the rule one piece at a time:

$$? - This sub-pattern represents an optional opening parenthesis. The backslash is necessary because parentheses already have special meaning in regular expressions. We want to remove that special meaning, and have a literal opening parenthesis. The question mark makes this character optional. That is, the person entering the data may or may not enclose the first three numbers with parenthesis, and we want to ensure that either one is acceptable. \d{3} - \d means a digit. (Remember: d for digit.) This can also be written as [:digit:], but the \d notation tends to be more common, for the simple reason that it’s less to type. The {3} following the \d indicates that we want to match the character exactly three times. That is, we require three digits in this portion of the match, or it will return failure. See the section Repetition quantifiers for the various syntaxes you can use to indicate the number of repetitions you want.$$? - Like the opening parenthesis we started with, this is an optional closing parenthesis.

[-. ]? - Another optional character, this allows, but does not require, a dash, a dot, or a space, to appear between the first three numbers and the next three numbers.

If you discover that your users are separating blocks with, say, an underscore, you could modify this part of the pattern to be [-._ ] instead, to include this new character.

The rest of the expression is exactly the same as what we have already done, except that the last block of numbers contains 4 numbers, rather than three.

The next step in crafting a regular expression is to think of the ways in which your pattern will break, and whether it is worth the additional work to catch these edge cases. For example, some users will enter a 1 before the entire number. Some phone numbers will have an extension number on the end. And that one hard-to-please user will insist on separating the numbers with a slash rather than one of the characters we have specified. These can probably be solved with a more complex regex, but the increased complexity comes at the price of speed, as well as a loss of readability. It took a page to explain what the current regex does, and that’s at least some indication of how much time it would take you to decipher a regex when you come back to it in a few months and have forgotten what it is supposed to be doing.

### Matching URIs¶

Finally, since this is, after all, a book about mod_rewrite, it seems reasonable to give some examples of matching URIs, as that is what you will primarily be doing for the rest of the book.

Most of the directives that we will discuss in the remainder of the book, take regular expressions as one of their arguments. And, much of the time, those regular expressions will describe a URI, which is the technical term for the resource that was requested from your server. And most of the time, that means everything after the http://www.domain.com part of the web address.

I’ll give several common examples of things that you might want to match.

#### Matching the homepage¶

Very frequently, people will want to match the home page of the website. Typically, that means that the requested URI is either nothing at all, or is /, or is some index page such as /index.html or /index.php. The case where it is nothing at all would be when the requested address was http://www.example.com with no trailing slash.

First, I’ll consider the case where they request either http://www.example.com or http://www.example.com/ (ie, with or without the trailing slash, but with no file requested). In other words, we want to match an optional slash.

As you probably remember from earlier, you use the ? character to make a match optional. Thus, we have: ^/?$This matches a string that starts with, and ends with, an optional slash. Or, stated differently, it matches either something that starts ends with a slash, or something that starts and ends with nothing. Next, we introduce the additional complexity of the file name. That is, we want to match any of the following four strings: We’ll build on the regex that we had last time, adding these additional requirements: ^/?(index\.(html|php))?$

This isn’t quite right, as you’ll see in a moment, but it’s mostly right. It does, however, introduce a new syntax that hasn’t been mentioned heretofore. That is the | syntax, which has the fancy name of “alternation” and means “one or the other.” So (html|php) means “either ‘html’ or ‘php’.”

So, we’ve got a regex that means a string that starts with a slash (optional) followed by index., followed by either html or php, and that entire string (starting with the index) is also optional, and then the string ends.

The one problem with this regex is that it also matches the strings ‘index.php’ and ‘index.html’, without a leading slash. While, strictly speaking, this is incorrect, in the actual context of matching a URI, it is probably fine, in most scenarios, to ignore that particular technicality. Note, however, that there are lots of people who spend a lot of time trying to figure out how to exploit technicalities like this, so be careful.

#### Matching a directory¶

If you wanted to find out what directory a particular requested URI was in, or, perhaps, what keyword it started with, you need to match everything up to the first slash. This will look something like the following:

^/([^/]+)

This regex has a number of components. First, there’s the standard ^/ which we’ll see a lot, meaning “starts with a slash.” Following that, we have the character class [^/], which will match any “not slash” character. This is followed by a + indicating that we want one or more of them, and enclosed in parentheses so that we can have the value for later observation, in $1. #### Matching a filetype¶ For the third example, we’ll try to match everything that has a particular file extension. This, too, is a very common need. For example, we want to match everything that is an image file. The following regex will do that, for the most common image types: \.(jpg|gif|png)$

Later on, you’ll see how to make this case insensitive, so that files with upper-case file extensions are also matched.

## Regex tools¶

If you’re going to spend more than just a little time messing with regexes, you’re eventually going to want a tool that helps you visualize what’s going on. There are a number of them available, each of which has different strengths and weaknesses. You’ll find that most of the really good tools for regular expression development come out of the Perl community, where regular expressions are particularly popular, and tend to get used in almost every program.

### Regex Coach¶

Regex Coach is available for Windows and Linux, and can be downloaded from <http://www.weitz.de/regex-coach>. Regex Coach allows you to step through a regular expression and watch what it does and does not match. This can be extremely instructive in learning to write your own regular expressions.

Regex Coach is free, but it is not Open Source.

### Reggy¶

Reggy is a Mac OS X application that provides a simple interface for crafting and testing regular expressions. It will identify what parts of a string are matched by your regular expression.

### pcretest¶

pcretest is a command-line regular expression tester that is available on most distributions of Linux, where it is usually installed by default.

In addition to simply telling you whether a particular string matched or not, it will also tell you what each of the various backreferences will be set to.

In the SCREENSHOT you can see what each of the various backreferences will be set to once the regular expression has been evaluated.

### Visual Regexp¶

Visual Regexp, available at <http://laurent.riesterer.free.fr/regexp/>, has more features than the options listed above, and might be a good option once you have mastered the basics of regular expressions and are ready to move onto something a little more sophisticated. It shows backreferences, and offers a wide variety of suggestions to help build a regex.

Visual Regexp is available as a Windows executable or as a Tcl/Tk script.

### Regular Expression Tester¶

Rather than being a stand-alone application like the others listed above, this is a Firefox plugin. It’s available at <https://addons.mozilla.org/en-US/firefox/addon/2077>, and, of course, requires Firefox to work.

### Online tools¶

In addition to these tools, there are many online tools, which you can use without having to download or install anything. These are of a wide variety of feature sets and quality, so I’d encourage you to shop around a little to find one that seems to work well. These appear and disappear on a weekly basis, and so I can’t promise that these sites will still be available at the time that you read this, but here are some that are worth mentioning at the time of writing:

### RegExr¶

<http://gskinner.com/RegExr/> - Includes a variety of pre-defined character classes, and the ability to save your regular expressions for later reference. Requires Javascript to use.

### Regex Pal¶

<http://regexpal.com/> - Less full-featured than RegExr, but sufficient for the purpose of crafting and testing regular expressions for the purpose of mod_rewrite, which doesn’t require replace functionality or multi-line matches.

### RewriteRule generators¶

You may find various websites that purport to be RewriteRule generators. I strongly encourage you to avoid these, and instead to learn how to craft your own rules. I’ve evaluated several of these sites, and every one has resulted in RewriteRule directives that were either enormously inefficient, or completely wrong.

## Summary¶

Having a good grasp of Regular Expressions is a necessary prerequisite to working with mod_rewrite. All too often, people try to build regular expressions by the brute-force method, trying various different combinations at random until something seems to mostly work. This results in expressions that are inefficient and fragile, as well as a great waste of time, and much frustration.

Keep a bookmark in this chapter, and refer back to it when you’re trying to figure out what a particular regex is doing.

Other recommended reference sources include the Perl regular expression documentation, which you can find online at <http://www.perldoc.com/perl5.8.0/pod/perlre.html> or by typing perldoc perlre at your command line, and the PCRE documentation, which you can find online at <http://pcre.org/pcre.txt>.

 [1] See section on Greedy matching

Introduction

URL Mapping